NIOCEDOLS

Insecticide for the control of flying (flies, mosquitoes) and crawling (roaches, ants) insects in domestic buildings, industrial sites, sites for the production and marketing of food, health and hospitals, vehicles, livestock farms.

Biocid type – liquid UN3082.

Proteyd:

10ml, 20ml, 50ml, 1L , 5L, 25L, 50L

Specifications:

The biocide is a concentrate from which water solutions are prepared. How to use the patch: The treatment is carried out by spraying with a suitable sprayer. Prior to processing, the premises should be released from humans, animals, pets, food, beverages, etc. Remove or cover aquariums, terrariums and cages for animals. Turn off the air filter on the aquarium.

40 mL biocide is dissolved in 5 L of water to give a working solution at a concentration of 0.8%. Spray the surfaces on which the insects land (around the windows, the doors, the top of the premises, etc.). Concentration of the active substances in the working solution: cypermethrin – 0.08%, tetramethrin – 0.04%, piperonyl butoxide – 0.08% The solution is not suitable for treating porous surfaces as the effectiveness of the product decreases. In this case, a higher concentration may be used.

75 mL биоцид се разтварят в 5 L вода за да се получи работен разтвор. Пръскат се местата, където се срещат насекомите, напр. подови первази, места за съхранение, около ВиК тръби, рамки на врати и прозорци, около и зад хладилници, шкафове, мивки, печки, по пукнатини и цепнатини. Концентрация на активните вещества в работния разтвор: циперметрин – 0.15 %, тетраметрин – 0.08 %, перметрин – 0.08 %, пиперонил бутоксид – 0.08 %. Разходна норма: 5 L работен разтвор на 100 m2 повърхност. Работният разтвор трябва да бъде приготвян непосредствено преди употреба. Интервал между отделните третирания: Обработката може да се повтори при необходимост. Достъп на хора и животни до третираните зони: След изсъхване на повърхностите и добро проветря75 mL of biocide are dissolved in 5 L of water to give a 1.5% working solution. Spray are places where insects are found, e.g. skirting boards, storage places, around Plumbing pipes, frames of doors and Windows, around and behind refrigerators, cabinets, sinks, stoves, the cracks and fissures. Concentration of the active substances in the solution: cypermethrin – 0.15%, tetramethrin – 0.075%, piperonyl butoxide – 0.15% Usage: 5 L working solution per 100 m2 surface. The working solution is prepared immediately prior to use. Interval between treatments: The processing can be repeated if necessary. Access people and animals to treated areas: After surface dries and good ventilation for 1 hour.

Cypermethrin cis/trans +/-40/60-10 g/100 g;

Tetrametrin-5 g/100 g;

Permetrin-5 g/100g;

butoxide piperonyl -10 g/100 g

Store only in the original package in a cool, well-ventilated, dry place away from food, at a temperature between 15 – 25 ° C.